Beaver dam analogues drive heterogeneous groundwater–surface water interactions     

Jeffrey Wade  Laura Lautz  Christa Kelleher  Philippe Vidon  Julianne Davis  Julio Beltran  Casey Pearce 《水文研究》2020,34(26):5340-5353

Beaver dam analogues (BDAs) are a cost-effective stream restoration approach that leverages the recognized environmental benefits of natural beaver dams on channel stability and local hydrology. Although natural beaver dams are known to exert considerable influence on the hydrologic conditions of a stream system by mediating geomorphic processes, nutrient cycling, and groundwater–surface water interactions, the impacts of beaver-derived restoration methods on groundwater–surface water exchange are poorly characterized. To address this deficit, we monitored hyporheic exchange fluxes and streambed porewater biogeochemistry across a sequence of BDAs installed along a central Wyoming stream during the summer of 2019. Streambed fluxes were quantified by heat tracing methods and vertical hydraulic gradients. Biogeochemical activity was evaluated using major ion porewater chemistry and principal component analysis. Vertical fluxes of approximately 1.0 m/day were observed around the BDAs, as was the development of spatially heterogeneous zones of nitrate production, groundwater upwelling, and anaerobic reduction. Strong contrasts in hyporheic zone processes were observed across BDAs of differing sizes. This suggests that structures may function with size-dependent behaviour, only altering groundwater–surface water interactions after a threshold hydraulic step height is exceeded. Patterns of hyporheic exchange and biogeochemical cycling around the studied BDAs resemble those around natural beaver dams, suggesting that BDAs may provide comparable benefits to channel complexity and near-stream function over a 1-year period.  相似文献   

Three dimensional simulation of fluid flow in X‐ray CT images of porous media     

A. Al‐Omari  E. Masad 《国际地质力学数值与分析法杂志》2004,28(13):1327-1360

A numerical scheme is developed in order to simulate fluid flow in three dimensional (3‐D) microstructures. The governing equations for steady incompressible flow are solved using the semi‐implicit method for pressure‐linked equations (SIMPLE) finite difference scheme within a non‐staggered grid system that represents the 3‐D microstructure. This system allows solving the governing equations using only one computational cell. The numerical scheme is verified through simulating fluid flow in idealized 3‐D microstructures with known closed form solutions for permeability. The numerical factors affecting the solution in terms of convergence and accuracy are also discussed. These factors include the resolution of the analysed microstructure and the truncation criterion. Fluid flow in 2‐D X‐ray computed tomography (CT) images of real porous media microstructure is also simulated using this numerical model. These real microstructures include field cores of asphalt mixes, laboratory linear kneading compactor (LKC) specimens, and laboratory Superpave gyratory compactor (SGC) specimens. The numerical results for the permeability of the real microstructures are compared with the results from closed form solutions. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

液核地球自转速率变化的带谐潮效应Ⅱ--数值计算与比较     

张捍卫  郑勇  杜兰  盘关松 《天文研究与技术》2003,(2):67-74

地球自转速率的潮汐变化可由无量纲参数k/cm)(k和cm分别为壳幔的有效Love数和有效极转动惯量)来表征。对于一个具有弹性地幔、平衡海潮和核幔不耦合的地球k/cm=0.944,且与潮波频率无关。海潮的非平衡扰动使k/cm为复数,且与频率有关。大气对自转速率有效勒夫数的贡献约为Δkat=0.0075。同时地幔滞弹性对勒夫数也产生扰动。利用本文得到的理论公式和最新的潮汐数据计算了地球自转速率的潮汐变化,及其有关地球物理机制的影响。  相似文献   

Anthropogenic trace metals in an ice core at Vestfonna,Svalbard, Norway     

Sumito Matoba  Hideaki Motoyama  Hideki Narita  Okitsugu Watanabe 《极地研究(英文版)》2003,14(1)

1　IntroductionAnicecoreobtainedfrom polarglaciersoricesheetsisoneofthemostimportantarchivestoreconstructpaleoclimaticandpaleoatmosphericcondition .Informationonpale o environmentcanbeextractedfromicecoresaschemicaland/orphysicalsignals.Amongthechemicalsignals,heavymetalsarenotedassignalsofterrestrialenvironmentalchangeandanthropogenicpollution (e.g .Murozumietal.1 969;NgandPatterson 1 981 ;Hongetal.1 994) .SinceconcentrationsofmostofthemetalsinpolarsnowincentralGreen landareatorbelowthepptl…  相似文献   

Metamorphic evolution of exhumed middle to lower crustal rocks in the Mojave Extensional Belt, southern California, USA     

D. J. HENRY  R. K. DOKKA 《Journal of Metamorphic Geology》1992,10(3):347-364

The Waterman Metamorphic Complex of the central Mojave Desert was exposed as a consequence of early Miocene detachment-dominated extension. However, it has evidence consistent with a more extensive geological history that involves collision of a crustal fragment(s), tectonic thickening by overthrusting and two periods of extension. The metamorphic complex contains granitoid intrusives and felsic mylonitic gneisses as well as polymetamorphic rocks that include marble, calc-silicate, quartzite. mafic granulite, pyribolite, amphibolite, migmatite and biotite schist. The latter group of rocks was affected by an initial series of high-grade metamorphic events (M1 and M2) and a localized lower grade overprint (M3). The initial metamorphism (M1) can be separated into two stages along its high-grade P–T path: M1a, a granulite facies metamorphism at 800–850° C and 7.5–9 kbar and Mlb, an upper amphibolite facies overprint at 750–800° C and 10–12 kbar. M1a developed mineral assemblages and textures consistent with granulite facies conditions at a reduced activity of H₂O and is associated with intense ductile deformation (D1) and minor local partial melting. M1b overprinted the granulite assemblages with a series of hydrous phases under conditions of increasing pressure and H₂O activity and is accompanied by little or no deformation. M2 developed at lower pressures and temperatures (650–750° C, 4.5–5.5 kbar) and is distinguished by a second local overprint of hydrous phases that reflects an input of aqueous fluids probably associated with the intrusion of a series of granitic dykes and veins. Effects of M3 are confined to the Mitchel detachment zone, an anastomosing early Miocene detachment fault, and are characterized by local ductile/brittle deformation (D2) of the pre-existing high-grade rocks and granitoid intrusives and by the production of mylonites and mylonitic gneisses under greenschist facies conditions (300–350° C, 3–5 kbar). The initial overprint (M1a) represents metamorphism, devolatilization and minor partial melting of supracrustal rocks under granulite facies conditions as a consequence of tectonic and, possibly, magmatic thickening. The increasing pressure transition of M1a to M1b reflects a period of continued compressional tectonism, thrusting and influx of H₂O, in part, locally related to crystallization of partial melts. The near isothermal decompression between M1b and M2 probably represents a pre-112-Ma extensional episode that may have been the result of a decompressional readjustment of a thickened crust. Following the initial extensional event, the metamorphic complex remained at depths of 10–17 km for at least 90 Ma until it was uplifted following Miocene extension. M3 develops locally in response to this second extensional period resulting from the early Miocene detachment faulting.  相似文献   

A micromechanical finite element model for linear and damage‐coupled viscoelastic behaviour of asphalt mixture     

Qingli Dai  Martin H. Sadd  Zhanping You 《国际地质力学数值与分析法杂志》2006,30(11):1135-1158

This study presents a finite element (FE) micromechanical modelling approach for the simulation of linear and damage‐coupled viscoelastic behaviour of asphalt mixture. Asphalt mixture is a composite material of graded aggregates bound with mastic (asphalt and fine aggregates). The microstructural model of asphalt mixture incorporates an equivalent lattice network structure whereby intergranular load transfer is simulated through an effective asphalt mastic zone. The finite element model integrates the ABAQUS user material subroutine with continuum elements for the effective asphalt mastic and rigid body elements for each aggregate. A unified approach is proposed using Schapery non‐linear viscoelastic model for the rate‐independent and rate‐dependent damage behaviour. A finite element incremental algorithm with a recursive relationship for three‐dimensional (3D) linear and damage‐coupled viscoelastic behaviour is developed. This algorithm is used in a 3D user‐defined material model for the asphalt mastic to predict global linear and damage‐coupled viscoelastic behaviour of asphalt mixture. For linear viscoelastic study, the creep stiffnesses of mastic and asphalt mixture at different temperatures are measured in laboratory. A regression‐fitting method is employed to calibrate generalized Maxwell models with Prony series and generate master stiffness curves for mastic and asphalt mixture. A computational model is developed with image analysis of sectioned surface of a test specimen. The viscoelastic prediction of mixture creep stiffness with the calibrated mastic material parameters is compared with mixture master stiffness curve over a reduced time period. In regard to damage‐coupled viscoelastic behaviour, cyclic loading responses of linear and rate‐independent damage‐coupled viscoelastic materials are compared. Effects of particular microstructure parameters on the rate‐independent damage‐coupled viscoelastic behaviour are also investigated with finite element simulations of asphalt numerical samples. Further study describes loading rate effects on the asphalt viscoelastic properties and rate‐dependent damage behaviour. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

南极威尔克斯地SGR钻孔处雪冰转化过程中的密度变化特征          下载免费PDF全文

韩建康  N.W.杨 《极地研究》1988,1(1):13-24

本文着重描述了SGR钻孔处冰盖上的积雪在密实化过程中的特征变化,并对该过程进行了分段的和全面的回归分析.结果表明,冰盖密度随深度增大,但增长幅度随深度减小.作者提出密度变化减小度的概念.计算得出的所研究冰芯钻取点的密度变化减小度为-0.15kg/m~3·m~2,粒雪成冰前的密实速率平均值为4.08kg/m~3·a.本文得到的冰盖密度变化“临界点”与以往报道的有所不同.分析这一现象时,作者强调当积雪还在活动层时冰盖温度的影响,并以此解释密度剖面的异常变化以及离差的回升.特别指出,积雪的密度变化具有气候学意义,它在一定程度上能够反映出积雪形成及变化过程中气候变化的某些信息.本文由密度变化确定的钻孔点雪冰转化深度为50米.  相似文献   

Feasibility of pre-earthquake strengthening of buildings based on cost-benefit and life-cycle cost analysis, with the aid of fragility curves   总被引：1，自引：1，他引：0  

Andreas J. Kappos  E. G. Dimitrakopoulos 《Natural Hazards》2008,45(1):33-54

There are two fundamental questions this article aims to deal with. First, whether a pre-earthquake strengthening of a large and heterogeneous building stock (the emphasis here is on building types common in S. Europe), is economically feasible or not, and second what is the optimal retrofit level for mitigating the seismic risk. To this purpose contemporary decision making tools, namely cost-benefit and life-cycle cost analyses, are tailored to the needs of the present study, and implemented with the aid of an ad-hoc developed new software application (COBE06). A method for estimating the reduction in structural vulnerability due to retrofit is proposed, as well as a methodology to determine the optimum retrofit level using the fragility curve approach. Finally, the proposed methodology is used in a pilot application that concerns the city of Thessaloniki, and results are drawn for the feasibility of strengthening the reinforced concrete building stock in this city.  相似文献   

存储式岩心定向取心技术应用研究          下载免费PDF全文

周策  陈文俊  石绍云  汤国起 《探矿工程》2008,35(7):77-79

采用岩心定向取心技术不仅可以迅速而方便地确定地下矿层和结构面的产状,而且还可以判断矿层的走向,了解地层倾向,预测钻孔弯曲的趋势。介绍了存储式岩心定向取心原理、关键技术问题、器具构成、技术参数以及现场应用情况。  相似文献   

钢筋混凝土梁结构断裂损伤诊断方法     

周尚志  王丽华刘瑛 《海洋工程》2005,23(4):47-51

提出一种基于BP神经网络的结构破损诊断方法,该方法以结构破损前后柔度的变化作为破损诊断网络输入,为了解决由于系统响应样本数据空间分布不均匀对网络收敛速度及网络诊断影响问题,对网络训练样本采用广义空间格点进行了交换,模拟算例及应用实例均表明,本文方法能准确诊断结构破损位置与破坏程度,是一种有效的结构破损诊断方法.  相似文献